DIY staircase manufacture
DIY stairs are not the simplest process, but quite feasible. Such a staircase can be used for a cellar, household buildings, a attic, etc.D.
The staircase will have a bias for the porch of approximately 34 degrees, 850 mm wide. The material will be a trimmed pine or other skill lumber.
The material should be carefully dried. Before starting work, it is necessary to rebuild the lumber with the help of a rubank and bring it to the required size. After that, you can start marking.
For marking, a special triangular plywood template is useful, on which it should be noted, as well as the height of lifting the step. Then you need to connect the marked points with the line and nail it to the plywood template, after leaving the bar on them. When applying the template to the beam, you need to mark the right bow.
Marking should start from the end of the beam. It is necessary to draw a line on which the beam will be shy in the future. Then, on the side of the height on the beam, you need to make a mark and transfer the template. Through this mark
DIY staircase manufacture
you need to draw a line that will be parallel to the lower line. So you need to make markings for all steps.
It is necessary to draw the lower line at a distance of the thickness of the steps for the steps. The last of the steps will be a false bar.
Marking for the left a bowstring should be carried out as a mirror reflection of the right. Before choosing grooves, you need to make sure that the markup is accurate. You need to combine the beam with each other. The groove must be selected to a depth of 20 mm, you also need to cut it with a hacksaw. Additional cuts will help to facilitate work. After the selection, the groove needs to be sawn down along the length.
Then you need to make parts for steps. For the railing, you need to take two boards 35 on 145 by 1030 and two more 35 by 145 by 1900. The remaining timber must be used as a arrival column, the lower part of which will need to be burying in the ground.
In order to verify the correctness of the staircase, you need to collect it and, if necessary, fit this.
