The frame technology of construction is one of the most promising today. Quite often it is used to build municipal structures, but in most cases it is used to build relatively small private houses. The main feature lies in simplicity, which gives it many advantages.
Any frame houses consist of two main elements: frame and SIP panels. Construction begins with the construction of the foundation, which does not take so much time, since the requirements for it are minimal. This is due to the fact that the weight of the structure is insignificant.
Next, the construction of the frame is carried out. It takes about a week. If necessary, the construction time can be reduced even more. The creation of the frame can be carried out in parallel with the filling of the foundation. However, then you will have to use the services of heavy equipment for transfer.
When the frame is ready, the walls that consist of the lightest panels are extended to it. Therefore, no additional technique for this is needed. Typically, houses from SIP panels have a very high level of energy efficiency. This is achieved through multilayer. The walls in frame houses are not a supporting element, so they almost completely consist of a combination of all kinds of heater, films and membranes. There is nothing surprising in the fact that such structures do not need additional insulation. They initially almost completely consist of it.
The main features of such houses are only two. First, their construction is cheap. The materials from which such structures are made relatively inexpensive. There is no need to use heavy construction equipment. The house resembles a designer, which consists of small and light elements.
Secondly, the construction of such a cottage will take at least time. To build a similar house made of brick, it will take about 8 months. Then you will have to wait a couple more years, while the shrinkage ends. Only after that it will be possible to start finishing work.
You need only 8 weeks to build a house from glued beams. You don’t have to wait for a shrinkage. The finishing work will also be finished. You will receive a ready -made house in which you can immediately settled.
In addition, you get a reliable and durable design. Its service life is approximately 60 years. If all the technologies were observed, the house will serve without complaints and twice as long.